(1)Investigation and research, hold a Zhuge Liang meeting. Please attend the appointment and listen to different opinions. (2)Big reasons can be consi…
1. Improper fabric process design and configuration (1) Improper selection of the pen number: After the total number of pens is determined, the layout…
When the shuttle is flying in the shuttle, the rolling shuttle and the shuttle will be generated due to improper position of the side support and hang…
The warp and weft yarns of the fabric located at the edge support are rolled and broken by 1 to 2 pieces, forming a yarn body that is easily broken, a…
A square eye is called a square eye, as shown in Figure 2-70. It is formed by the fact that the tensions of the upper and lower layers of warp yarns a…
(1) The position of the rear beam (C28) is too low. After opening, the tension difference between the upper and lower warp yarns is too small. When th…
(1) In order to eliminate square eyes and make the cloth surface full and flat, the back beam of the plain weave fabric is about 19-22mm higher than t…
Natural Advanced Technology Company is a supplier of environmentally friendly fiber fabrics in Canada. The company, together with the Canadian Natio…
Thin and breathable plain weave fabrics woven from thinner cotton yarn can be used for curtains or summer clothing. Also called glass yarn. Bari y…
(2)A034ASetting of the spacing of a six-roller cotton opener:Native It is composed of six rollers from bottom to top in sequence45° angle inclined, th…
(I)A006Style series automatic cotton mixer This machine is suitable for cotton, cotton chemical fibers and 76mm The following medium-length chemical f…
In recent years, with the advancement of science and technology and the improvement of people’s living standards, people’s understanding…